Altair MG32 Mini Guide Scope & Polar Alignment Scope - QRB Rings Kit

Further details

The Altair MG32 Mini Guide Scope is a small "set and forget" high quality optical tube with a very clever design, which is compatible with virtually any guide camera with a C or CS Thread on the front.

The MG32 is small, very compact, and light - ideal for portable wide field imaging. You can mount it on just about any telescope finder base with the included Universal Finder Bracket, and of course all Altair refractors. Two Stainless Steel M4 screws are included.

Small and accurate:
This is the perfect guider for your iOptron SmartEQ PRO, SkyGuider, Star-Adventurer or other small tracking mount. It delivers good accuracy with refractors and camera lenses up to 600mm focal length. Weight is about 350 grams and length is 165mm.

Perfect for polar alignment with SharpCap PRO and Altair GPCAM:
If you order an Altair GPCAM camera with your MG32, you get a free 1 year SharpCap PRO software license with the camera, so you can polar align your telescope or camera lens with extreme accuracy out of the box in minutes. Your MG32 doesn't even need to be perfectly aligned with your optical tube. You can just point the finder scope within 5 degrees of the north or south celestial poleand the software will do the rest. This alone will revolutionise your imaging.

Zero flex design
and your guide camera will stay in perfect focus forever: The camera is threaded into the optical housing, so you don't need to worry about differential flex. The finder scope front lens is rotated to focus, then the locking ring is tightened up. You are now focused forever.

Fits most existing finder scope rings:
The tube diameter (white part) is 36mm enabling and 85mm long enabling it to be used with most finder scope rings. The full length is 165mm with dewshield retracted, 185mm with dewshield fully extended.

Included in this package:
MG32 Finder/Guide Scope with Universal Finder Bracket and Rings:
MG32 Optical Tube with 32mm fully coated doublet lens, 126.56mm focal length, F3.955.
Front rubber dust cap, rear threaded dust cap.
A CS-Mount connector ring to attach 3rd party cameras with CS female front threads.
The rings and stalk come with a universal finder bracket (Code: UNIFBR) which fits most optical tubes and of course all Altair refractors.
The stalk has a dovetail which fits most existing finder brackets.
Two stainless steel M4 screws are included to attach the Universal Finder Bracket to your scope or dovetail plate.

Camera not included with this package

Delivery Information

Reviews

  Perfect for Portable Setup  The MG32 works brilliantly with my Altair 60EDF on a Skywatcher Star Adventurer mount. I was able to fit my existing Zwo120mm camera using the CS adaptor. Can now polar align with sharpcap Pro and guide the mount in RA with PHD. Excellent service, Thank you.  (09/09/2019) Paul Moyers - St Helens

  Lovely scope and excellent service  Beautifully made little unit, complete with mount that bolted perfectly onto my WO61 scope. Unfortunately the six knurled clamp screws were missing but Harrison Telescopes got me replacements stright away. Excellent service all round.   (21/06/2019) Tim - UK